Accessories
Cases, power supplies, cooling, cameras and expansion modules for the Orange Pi range — 67 items across six categories.
Cases and enclosures
Aluminium and ABS enclosures cut for a specific board. Check the board name before ordering — the cut-outs are not interchangeable between models.
OrangePi 6 Plus metal case
Premium aluminium alloy, precision machined for heat transfer as well as protection.
OrangePi 6 dedicated case
Purpose-cut enclosure for the OrangePi 6.
Orange Pi 5 Plus shell
Aluminium alloy, sandblasted and anodised for wear resistance.
Orange Pi 5 / 5B shell
Aluminium alloy, sandblasted and anodised. Fits both the 5 and the 5B.
Case for R1 Plus LTS
Metal shell cut specifically for the R1 Plus LTS.
Case for Pi 4 / 4B / 4 LTS
Takes an external antenna; the antenna is bought separately.
Case for Pi 3 LTS
ABS, cut for the 3 LTS board layout.
Case for Pi 3
Environmentally friendly ABS.
Case for PC / PC Plus / PC2
ABS, practical and durable.
Case for One / One Plus
Transparent shell, crystal clear.
Case for Lite / Lite2
ABS, practical and durable.
Case for Zero / Zero LTS
Side grilles for better heat dissipation.
Case for Zero / Zero LTS (expansion)
Takes the board together with an expansion board.
Case for Zero2
High-quality screw protectors to stop the shell wearing.
Case for R1 Plus
Standard screws, straightforward to install.
Power supplies
Match the supply to the board — an underpowered adapter is the single most common cause of instability on these boards. Both US and EU plug standards are listed.
PD100W Type-C — CN plug
100W multi-protocol fast charging, efficient compatibility.
PD100W Type-C — US plug
100W, FCC certified, highly compatible.
PD100W Type-C — EU plug
100W, EU certified, worldwide voltage compatibility.
PD27W Type-C — US plug
For OrangePi 5 Pro, 5 Max, 5 Plus and CM5.
PD27W Type-C — EU plug
For OrangePi 5 Pro, 5 Max, 5 Plus and CM5.
5V 4A Type-C — US plug
For Orange Pi 800, 4 LTS and 4B.
5V 4A Type-C — EU plug
For Orange Pi 800, 4 LTS and 4B.
5V 4A DC — US plug
For Orange Pi 4 LTS and 4B.
5V 4A DC — EU plug
For Orange Pi 4 LTS and 4B.
5V 3A Type-C — US plug
For Orange Pi Zero2, R1 Plus and 3 LTS.
5V 3A Type-C — EU plug
For Orange Pi Zero2, R1 Plus and 3 LTS.
5V 3A DC — US plug
DC barrel connector.
5V 3A DC — EU plug
DC barrel connector.
5V 2A Micro USB — US plug
For Orange Pi Zero, R1, Zero Plus, Zero Plus2 and the IoT series.
Cables and adapters
Video, data and power leads cut for the Orange Pi connectors.
HDMI HD cable
Standard HDMI lead.
Micro HDMI HD cable
4K capable; for Orange Pi Zero2 and other micro-HDMI boards.
HDMI to VGA converter
Fully compatible, supports a wide range of systems.
OTG data line
Works with any device carrying a Type-C interface.
SATA line
Plug and play, no driver installation required.
USB to Type-C 2.0 wire
Faster charging and a steadier supply.
USB to DC 4.0 wire
Provides 5V DC from a USB port to a DC barrel input.
AV cable
One to three AV, suitable for most televisions.
9-pin to dual USB 2.0 extension
Motherboard header to two USB 2.0 ports, for OrangePi 5 Pro.
Cooling and heat sinks
The RK3588 and Ascend boards throttle under sustained inference. Active cooling is not optional if the board is running a model all day.
Heat dissipation assembly — OrangePi 6 Plus
Silent operation with intelligent speed control.
Heat dissipation assembly — Zero 3W
Up to 10,000 RPM, black anodised aluminium, 2-pin plug and play.
All-in-one cooling fan — 5 Plus / 5 v1.3.2
Full aluminium heatsink with a transparent PC fan.
Aluminium heat sink — 5 Plus / 5 v1.3.2
Thermal aluminium profile, passive.
Aluminium heat sink
Passive heat-dissipating aluminium, fast thermal conductivity.
Cameras and displays
MIPI CSI camera modules and screens. Camera compatibility is board-specific — the supported boards are listed against each one.
13MP camera (13850)
For Orange Pi 5, 5B, 5 Plus, 6 and 6 Plus.
13MP camera (13855)
For Orange Pi 5, 5B, 5 Plus, 6 and 6 Plus.
13MP camera — RK3399
MIPI interface, for the Rockchip RK3399 series boards.
1080P HD camera
General-purpose HD camera module.
5MP camera
Supports the Allwinner H3 series boards.
2MP camera
For One, PC, Lite, Plus 2E, PC Plus, PC2, Zero Plus2 and 2G-IoT.
2MP camera — 3G-IoT
HD quality, for the Orange Pi 3G-IoT only.
Orange Pi 5 touch screen
10.1 inch TFT touch display.
Orange Pi touch screen
10.1 inch TFT touch display.
Portable monitor
Works with the Orange Pi range, Orange Pi 800, consoles, phones and PCs.
Base boards, modules and expansion
Carrier boards for the compute modules, wireless and storage modules, and the small sensor and expansion boards.
OrangePi CM5 base board
Two 2.5G LAN ports, one Gigabit LAN port and four camera ports.
OrangePi CM5 tablet base board
Pairs with the CM5 core board with Wi-Fi 5 + BT 5.0, BLE.
Orange Pi CM4 base board
CSI, DSI, fan, HDMI, USB, Gigabit RJ45, TF card and M.2 M-Key.
eMMC module — 32GB / 64GB / 256GB
Three capacities, fast read and write, broad compatibility.
Orange Pi 5 Wi-Fi 6 + BT 5.3 module
High-performance wireless module for the Orange Pi 5.
Wireless module R6
Wi-Fi 6 + BT 5.2 module for the Orange Pi 5 Plus.
Expansion board — Zero 2W
Breaks out the Zero 2W headers.
Expansion board — Pi 4 / 4B
Expansion board for the Orange Pi 4 and 4B.
Expansion board — 13-pin
For Zero, Zero LTS, Zero2, R1 and R1 Plus LTS.
RTC clock module
Works with every Orange Pi development board.
Infrared receiver module
Works with every board; the driver needs adapting by the user.
Body sensor
Presence sensor, works with every Orange Pi development board.
IR controller
Ergonomic handset for IR-equipped boards.
Orange Pi 800 wireless mouse
For keyboard computers, laptops and desktops.
Not sure which one fits your board?
Cases, cameras and power supplies are cut for specific boards. Tell us which board you are running and we will confirm the right part, what we hold in Rawalpindi, and the lead time on anything we need to bring in.
Ask about an accessory